NAME File::Xcopy - copy files after comparing them. SYNOPSIS use File::Xcopy; my $fx = new File::Xcopy; $fx->xcopy("file1","file2", "action"); $fx->xcopy("from_dir", "to_dir", "action", "file_name_pattern"); # the same with short name $fx->xcp("file1","file2", "action"); $fx->xcp("from_dir", "to_dir", "action", "file_name_pattern"); DESCRIPTION The File::Xcopy module provides two basic functions, "xcopy" and "xmove", which are useful for coping and/or moving a file or files in a directory from one place to another. It mimics some of behaviours of "xcopy" in DOS but with more functions and options. The differences between "xcopy" and "copy" are * "xcopy" searches files based on file name pattern if the pattern is specified. * "xcopy" compares the timestamp and size of a file before it copies. * "xcopy" takes different actions if you tell it to. The Constructor new(%arg) Without any input, i.e., new(), the constructor generates an empty object with default values for its parameters. If any argument is provided, the constructor expects them in the name and value pairs, i.e., in a hash array. xcopy($from, $to, $pat, $par) Input variables: $from - a source file or directory $to - a target directory or file name $pat - file name match pattern, default to {.+} $par - parameter array log_file - log file name with full path Variables used or routines called: get_stat - get file stats output - output the stats execute - execute a action How to use: use File::Xcopy; my $obj = File::Xcopy->new; # copy all the files with .txt extension if they exists in /tgt/dir $obj->xcopy('/src/files', '/tgt/dir', '\.txt$'); use File:Xcopy qw(xcopy); xcopy('/src/files', '/tgt/dir', '\.txt$'); Return: ($n, $m). $n - number of files copied or moved. $m - total number of files matched xmove($from, $to, $pat, $par) Input variables: $from - a source file or directory $to - a target directory or file name $pat - file name match pattern, default to {.+} $par - parameter array log_file - log file name with full path Variables used or routines called: get_stat - get file stats output - output the stats execute - execute a action How to use: use File::Xcopy; my $obj = File::Xcopy->new; # move the files with .txt extension if they exists in /tgt/dir $obj->xmove('/src/files', '/tgt/dir', '\.txt$'); Return: ($n, $m). $n - number of files copied or moved. $m - total number of files matched execute ($act) Input variables: $act - action: report|test - test run copy|CP - copy files from source to target only if 1) the files do not exist or 2) newer than the existing ones This is default. overwrite|OW - copy files from source to target only if 1) the files exist and 2) no matter is older or newer move|MV - same as in copy except it removes from source the following files: 1) files are exactly the same (size and time stamp) 2) files are copied successfully update|UD - copy files only if 1) the file exists in the target and 2) newer in time stamp Variables used or routines called: None How to use: use File::Xcopy; my $obj = File::Xcopy->new; # update all the files with .txt extension if they exists in /tgt/dir $obj->get_stat('/src/files', '/tgt/dir', '\.txt$'); my ($n, $m) = $obj->execute('overwrite'); Return: ($n, $m). $n - number of files copied or moved. $m - total number of files matched get_stat($from, $to, $pat, $par) Input variables: $from - a source file or directory $to - a target directory or file name $pat - file name match pattern, default to {.+} $par - parameter array log_file - log file name with full path source Specifies the file(s) to copy. destination Specifies the location and/or name of new files. /A Copies only files with the archive attribute set, doesn't change the attribute. /M Copies only files with the archive attribute set, turns off the archive attribute. /D:m-d-y Copies files changed on or after the specified date. If no date is given, copies only those files whose source time is newer than the destination time. /EXCLUDE:file1[+file2][+file3]... Specifies a list of files containing strings. When any of the strings match any part of the absolute path of the file to be copied, that file will be excluded from being copied. For example, specifying a string like \obj\ or .obj will exclude all files underneath the directory obj or all files with the .obj extension respectively. /P Prompts you before creating each destination file. /S Copies directories and subdirectories except empty ones. /E Copies directories and subdirectories, including empty ones. Same as /S /E. May be used to modify /T. /V Verifies each new file. /W Prompts you to press a key before copying. /C Continues copying even if errors occur. /I If destination does not exist and copying more than one file, assumes that destination must be a directory. /Q Does not display file names while copying. /F Displays full source and destination file names while copying. /L Displays files that would be copied. /H Copies hidden and system files also. /R Overwrites read-only files. /T Creates directory structure, but does not copy files. Does not include empty directories or subdirectories. /T /E includes empty directories and subdirectories. /U Copies only files that already exist in destination. /K Copies attributes. Normal Xcopy will reset read-only attributes. /N Copies using the generated short names. /O Copies file ownership and ACL information. /X Copies file audit settings (implies /O). /Y Suppresses prompting to confirm you want to overwrite an existing destination file. /-Y Causes prompting to confirm you want to overwrite an existing destination file. /Z Copies networked files in restartable mode. Variables used or routines called: from_dir - get from_dir to_dir - get to_dir fn_pat - get file name pattern param - get parameters find_files - get a list of files from a dir and its sub dirs list_files - get a list of files from a dir file_stat - get file stats fmtTime - format time How to use: use File::Xcopy; my $obj = File::Xcopy->new; # get stat for all the files with .txt extension # if they exists in /tgt/dir $obj->get_stat('/src/files', '/tgt/dir', '\.txt$'); use File:Xcopy qw(xcopy); xcopy('/src/files', '/tgt/dir', 'OW', '\.txt$'); Return: ($sr, $rr). $sr - statistic hash array ref with the following keys: OK - the files are the same in size and time stamp txt - "The Same size and time" cnt - count of files szt - total bytes of all files in the category NO - the files are different either in size or time txt - "Different size or time" cnt - count of files szt - total bytes of all files in the category OLD{txt|cnt|szt} - "File does not exist in TO folder" NEW{txt|cnt|szt} - "File does not exist in FROM folder" EX0{txt|cnt|szt} - "File is older or the same" EX1{txt|cnt|szt} - "File is newer and its size bigger" EX2{txt|cnt|szt} - "File is newer and its size smaller" STAT max_size - largest file in all the selected files min_size - smallest file in all the selected files. max_time - time stamp of the most recent file min_time - time stamp of the oldest file The sum of {OK} and {NO} is equal to the sum of {EX0}, {EX1} and {EX2}. $rr - result hash array ref with the following keys {$f}{$itm}: {$f} - file name relative to from_dir or to_dir file - file name without dir parts pdir - parent directory prop - file stat array rdir - relative file name to the $dir path - full path of the file type - file status: NEW, OLD, EX1, or EX2 f_pdir - parent dir for from_dir f_size - file size in bytes from from_dir f_time - file time stamp from from_dir t_pdir - parent dir for to_dir t_size - file size in bytes from to_dir t_time - file time stamp from to_dir tmdiff - time difference in seconds between the file in from_dir and to_dir szdiff - size difference in bytes between the file in from_dir and to_dir action - suggested action: CP, OW, SK The method also sets the two parameters: stat_ar, file_ar and you can get it using this method: my $sr = $self->param('stat_ar'); my $rr = $self->param('file_ar'); output($sr,$rr, $out, $par) Input variables: $sr - statistic hash array ref from xcopy $rr - result hash array ref containing all the files and their properties. $out - output file name. If specified, the log_file will not be used. $par - array ref containing parameters such as log_file - log file name Variables used or routines called: from_dir - get from_dir to_dir - get to_dir fn_pat - get file name pattern param - get parameters action - get action name format_number - format time or size numbers How to use: use File::Xcopy; my $fc = File::Xcopy->new; my ($s, $r) = $fc->get_stat($fdir, $tdir, 'pdf$') $fc->output($s, $r); Return: None. If $out or log_file parameter is provided, then the result will be outputed to it. format_number($n,$t) Input variables: $n - a numeric number $t - number type: size - in bytes or time - in seconds Variables used or routines called: None. How to use: use File::Xcopy; my $fc = File::Xcopy->new; # convert bytes to KB, MB or GB my $n1 = $self->format_number(10000000); # $n1 = 9.537MB # convert seconds to DDD:HH:MM:SS my $n2 = $self->format_number(1000000,'time'); # $n2 = 11D13:46:40 Return: formated time difference in DDDHH:MM:SS or size in GB, MB or KB. find_files($dir,$re) Input variables: $dir - directory name in which files and sub-dirs will be searched $re - file name pattern to be matched. Variables used or routines called: None. How to use: use File::Xcopy; my $fc = File::Xcopu->new; # find all the pdf files and stored in the array ref $ar my $ar = $fc->find_files('/my/src/dir', '\.pdf$'); Return: $ar - array ref and can be accessed as ${$ar}[$i]{$itm}, where $i is sequence number, and $itm are file - file name without dir pdir - parent dir for the file path - full path for the file This method resursively finds all the matched files in the directory and its sub-directories. It uses "finddepth" method from File::Find(1) module. list_files($dir,$re) Input variables: $dir - directory name in which files will be searched $re - file name pattern to be matched. Variables used or routines called: None. How to use: use File::Xcopy; my $fc = File::Xcopu->new; # find all the pdf files and stored in the array ref $ar my $ar = $fc->list_files('/my/src/dir', '\.pdf$'); Return: $ar - array ref and can be accessed as ${$ar}[$i]{$itm}, where $i is sequence number, and $itm are file - file name without dir pdir - parent dir for the file path - full path for the file This method only finds the matched files in the directory and will not search sub directories. It uses "readdir" to get file names. file_stat($dir,$ar) Input variables: $dir - directory name in which files will be searched $ar - array ref returned from C or C method. Variables used or routines called: None. How to use: use File::Xcopy; my $fc = File::Xcopu->new; # find all the pdf files and stored in the array ref $ar my $ar = $fc->find_files('/my/src/dir', '\.pdf$'); my $br = $fc->file_stat('/my/src/dir', $ar); Return: $br - hash array ref and can be accessed as ${$ar}{$k}{$itm}, where $k is "rdir" and the $itm are size - file size in bytes time - modification time in Perl time file - file name pdir - parent directory This method also adds the following elements additional to 'file', 'pdir', and 'path' in the $ar array: prop - file stat array rdir - relative file name to the $dir The following lists the elements in the stat array: file stat array - ${$far}[$i]{prop}: 0 dev device number of filesystem 1 ino inode number 2 mode file mode (type and permissions) 3 nlink number of (hard) links to the file 4 uid numeric user ID of file's owner 5 gid numeric group ID of file's owner 6 rdev the device identifier (special files only) 7 size total size of file, in bytes 8 atime last access time in seconds since the epoch 9 mtime last modify time in seconds since the epoch 10 ctime inode change time (NOT creation time!) in seconds sinc e the epoch 11 blksize preferred block size for file system I/O 12 blocks actual number of blocks allocated This method converts the array into a hash array and add additional elements to the input array as well. fmtTime($ptm, $otp) Input variables: $ptm - Perl time $otp - output type: default - YYYYMMDD.hhmmss 1 - YYYY/MM/DD hh:mm:ss 5 - MM/DD/YYYY hh:mm:ss 11 - Wed Mar 31 08:59:27 1999 Variables used or routines called: None How to use: # return current time in YYYYMMDD.hhmmss my $t1 = $self->fmtTime; # return current time in YYYY/MM/DD hh:mm:ss my $t2 = $self->fmtTime(time,1); Return: date and time in the format specified. CODING HISTORY * Version 0.01 04/15/2004 (htu) - Initial coding * Version 0.02 04/16/2004 (htu) - laid out the coding frame * Version 0.06 06/19/2004 (htu) - added the inline document * Version 0.10 06/25/2004 (htu) - finished the core coding and passed first testing. FUTURE IMPLEMENTATION * add directory structure checking Check whether the from_dir and to_dir have the same directory tree. * add advanced parameters Ssearch file by a certain date, etc. AUTHOR Copyright (c) 2004 Hanming Tu. All rights reserved. This package is free software and is provided "as is" without express or implied warranty. It may be used, redistributed and/or modified under the terms of the Perl Artistic License (see http://www.perl.com/perl/misc/Artistic.html)